Introduction

FS-200 is the anti drip additive that is obtained by PTFE(Teflon). It can be kept away dripping when it happened to fire. Compared to general PTFE powder, it has a lot of advantages in extrusion to produce various plastics. Benefit Free flowing granule Excellent dispersion into resin Application FS-200 is used as a raw material of engineering plastics, especially PC, ABS, PC/ABS Alloy, Nylon etc. Storage and handling Avoid contact with humidity, heat, dust, stain and so on. Do not rubbing preventing chunk. Specifications Polymer : SAN Appearance : White Powder Particle size : Avg.<2mm PTFE Content : 45~55wt% Packing 20kgs/Carton

Polymer Processing Aids
An additive added to attain improvement for processing of polyolefin resin at very low levels usage(100~1000 ppm). It is a white powder made of modified fluoro-elastomer. Polymer processing aid is coasted at the inside of the die wall and decreases the friction between melted resin and the die wall.

Anti Dripping Agents

Anti Dripping Agents to prevent the burning resin from falling when the plastic product is on fire. Compared to ordinaty PTFE powder, there are various strenths.

Benefits

1) Excellent dispersion in resin 2) Free flow powder 3) Excellent injection product surface 4) PFOA Free

Application examples

Comsumer electronics(LCD TV Frame, TV housing, computer & Fax housing etc.), electronic and electric parts, automobile.