WS-M-2400-2
WS-M-2400-2 can be easily installed in a patient room to convert it into a temporary Negative Pressure Isolation Room (NPIR) in case of an emergency case related to infectious diseases.
It takes much less time and cost than constructing a typical NPIR.
After the use of NPIR is done, our portable negative pressure units can be easily removed and stocked in storage.
№ | Category | Specifications |
---|---|---|
One | Model | WS-M-2400-2 |
2 | Coverage range (m3) | 100m3 |
3 | Dimensions (mm) | 522W x 740D x 1090H |
4 | Motor | BLDC |
5 | Air volume | 1000 CMH x 20 mmAq (1200 CMH max) |
6 | Power | AC 220V - 160W - 60Hz |
7 | Weight | 62kg |
8 | Noise level | 30dB to 50dB |
9 | HEPA filter | 610 x 610 x 90T (Gel type) |
PRE filter | 610 x 610 x 15T (AL type) |
COVER RANGE
• WS-M-2400-2 applicable for up to 100m3 ±15% room
GENERAL FEATURES
• Aerodynamic design presents significantly less noise and vibration compared to other similar products
• PRE filter grabs large particle dusts
• HEPA filter grabs fine dust and high-risk pathogens
• Digital display installed outside the room to check the negative pressure status inside the room.
• Air volume adjustable by BLDC motor (0 ~ 25 CMM)
NETWORK SYSTEM (Optional)
Built-in RS485 network system allows you to check and control the negative pressure status and filter replacement cycle of the rooms at the central management room.
The person in charge
Myungsik LeeAddress
16 Deokchonsamseonggol-gil Oksan-myeon Heungdeok-gu, Cheongju-si, Chungcheongbuk-do (28114)wosem co
Please enter the text on the left image to prevent automatic input.
0 / 4000